Language: Chinese line English


Principle requirements for spiral steel pipe stacking

1. The principle requirement of spiral steel pipe stacking code is to ensure that the code is stable and safe, and that the materials of different varieties should be palletized separately to prevent entanglement and mutual erosion;

2. It is forbidden to store articles that are erosive to steel in the vicinity of the spiral steel pipe;
3. The bottom of the spiral steel pipe should be high, strong and flat to prevent the material from being damp or deformed;
4. The same kind of materials are stacked separately according to the storage;
5. Spiral steel tube steel stacked in the open air, there must be wooden mats or strips underneath, the sloping surface is slightly inclined to facilitate drainage, and pay attention to the flatness of the material to prevent bending deformation;
6. The height of the spiral steel pipe stacking, the artificial homework does not exceed 1.2m, the mechanical homework does not exceed 1.5m, and the 垛 width does not exceed 2.5m;
7. There should be a certain passage between the raft and the raft. The inspection road is generally 0.5m. The access passage depends on the material size and the transportation machinery, generally 1.5~2.0m;
8. The open-pitger angle steel and channel steel should be placed downside down, that is, the mouth should face downward, the I-beam should be placed vertically, and the I-groove surface of the steel should not face upwards to avoid rusting of the water;
9. The bottom of the raft is high. If the warehouse is a cement floor of the sunny side, the height of the lining is 0.1m; if it is muddy, the height must be 0.2~0.5m. If it is an open space, the concrete floor height is 0.3~0.5m, and the sand surface is 0.5~0.7m.



Contact: Maggie Yang

Phone: 13931707331 15131788678

Tel: 0317-3771170